PFM378-B125-CB
Integrated Solar Monitoring System(Without Lithium Battery)
> Solar Power System.
> Integrated design, easy to install.
> Pole mount.
> Angle flexible adjustment of solar panel and camera mount.
> 125 W Monocrystalline solar panel.
> Aluminum alloy frame.
> Built sturdy to resist storms with sustained winds up to 117 km/h. (Note: The following four functions are only supported when battery power is used.)
> Remote monitoring available through the mobile app.
> Maximum Power Point Tracking (MPPT) charging controller.
> RS-485 communication.
> Electric protection.
> With ceiling mount bracket of PTZ camera PFB301C & mount adapter PFA111.
Solar Panel
Type
Monocrystalline silicon
Max. Power
125 W
Output Voltage
18.8 VDC
Solar Cell Efficiency
0.21
Max. Mechanical Load
5400 Pa
Controller
Type
MPPT
Operating Voltage
12 VDC
Rated Charging Current
10 A
Rated discharge Current
10 A
MPPT Tracking Efficiency
≥99%
Communication Mode
RS-485
Operating Temperature
–20 °C to +60 °C (–4 °F to +140 °F)
Rated Charging Power
125 W
Over-discharge Protection Voltage
11.1 VDC
Others
Over-temperature, over-discharge, over-voltage and low-temperature protection of battery; overload and short circuit protection of load.
Port
Power Output
Φ5.5 mm × Φ2.1 mm × 12 mm (Φ0.22" × Φ0.08" × 0.47")
RS–485
Red: RS-485-A
Black: RS-485-BOutput Port
CSA authorized M15 2-core waterproof connector (connected to lithium battery)
General
Main Body Material
Q235 steel/aluminum
IP Rating
IP65
Installation
Pole mount, Φ80 mm–Φ150 mm
Adjustable Angle
Solar panel: H: 360°, V: 10°/20°/30°/40°/50°
Product Dimensions
875 mm × 761.9 mm × 951.9 mm (34.45" × 30.00" × 37.48")
Packaging Dimensions
930 mm × 825 mm × 275 mm (36.61" × 32.48" × 10.83")
Packaging Method
1 pc in each carton
Net Weight
20.1 kg (44.31 lb)
Gross Weight
26 kg (57.32 lb)
Environment
Operating Altitude
<3,000 m (9,842.52 ft)
Applicable Area
Areas with daily exposure to solar radiation for more than 3.5 hours
Operating Temperature
–20 °C to +60 °C (–4 °F to +140 °F)
Operating Humidity
<95% (RH)
Storage Temperature
0 °C to +40 °C (+32 °F to +104 °F)
Storage Humidity
<95% (RH)
Certifications
Certifications
CE: EN 55032:2015+A11:2020, EN 55030-4:2011+A1:2014, EN 55024:2010+A1:2015, EN 55035:2017+A11:2020
FCC: 47 CFR Part 15, Subpart B
UKCA: EN 55032:2015+A11:2020, EN 55030-4:2011+A1:2014, EN 55024:2010+A1:2015, EN 55035:2017+A11:2020
